Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Posted in:  
  • Mark Norris
    19 September 2026 at 16:34 #83932

    Hi Peter, I sent my original Delco distributor to the Distributor Doctor for a rebuild. He said they were awful units and very difficult to work on due to the lack of parts. I keep a NOS Lucas DZ6 in standby for when it eventually gives up the ghost (they are a direct swop once the driven gear is attached by a roll pin). I’d change the points, rotor arm and condenser as a matter of course but also check the coil, the graphite dist. cap contact & spring as well as cleanup the HT contacts in the cap. Could also be tracking or crack within the cap. In other words all the usual suspects!

    • This reply was modified 3 weeks, 6 days ago by Mark Norris.
    • This reply was modified 3 weeks, 6 days ago by Mark Norris.
    Mark Norris
    17 April 2025 at 11:04 #75901

    Hi David,

    I bought a full set of gaiters for my T7 M45 restoration from Accents Unlimited. He did a first class job with a good turnaround time and far less expensive than Wefco. It’s a one man company so gives good attention to detail.

    Mark

Viewing 2 posts - 1 through 2 (of 2 total)