-
Christoph Beat Hollenstein8 October 2026 at 11:40 #84096
A few days ago, whilst driving my 16/80, the clutch bell broke when I pressed the clutch pedal.
My 3 questions:
– Does anyone have an intact clutch bell or know where I can get one?
– Who could professionally weld such bells (I have the broken parts)?
– Is it possible to recreate one using 3D metal printing?
Many thanks in advance for any valuable feedback!

Christoph, Switzerland
- This topic was modified 4 weeks ago by Christoph Beat Hollenstein.
- This topic was modified 4 weeks ago by Christoph Beat Hollenstein.
Attachments:
You must be logged in to view attached files.Len Cozzolino8 October 2026 at 18:14 #84104Sorry to hear about your broken bell housing. While aluminium can be welded, it is not always successful on such old aluminium castings. I don’t have one, but I can make enquiries for you, as I know most 16/80 owners.
Len
Christoph Beat Hollenstein9 October 2026 at 12:16 #84109Dear Len
Thanks for your very quick replay. I would indeed most appreciate your support by making inquires with other 16/80 owners you know.
They could contact me here, via my mobile +41 79 320 70 50 or at ch@chollenstein.ch.
Best regards
Christoph
Christoph Beat Hollenstein9 October 2026 at 15:13 #84112
Would the housing of the M45 (CLT425AK) fot on a 16/80?- This reply was modified 3 weeks, 6 days ago by Christoph Beat Hollenstein.
L C Hannam19 October 2026 at 11:22 #84190M45 engine is Meadows manufacture, 16/80 is Crossley, extremely unlikely they would match.
I have had several broken / cracked Lagonda aluminium castings repaired successfully by laser welding. I can recommend Laser Services in Aylesbury. UK location obviously, but his charges are something around 90% less than EMP, top quality work … speak with Patrick there, he is very helpful and nice to deal with. All that said, that is a pretty catastrophic failure, best to ensure no other cracks are evident before welding.
Laurence
-
|
You must be logged in to reply to this topic.