-
Colin M345 December 2014 at 14:19 #51087
Hi David
I agree with your experience on powder coating and was sceptical. However the technology seems to have moved on a lot and I was very impressed by the results from this guy. He works from an old airfield in Suffolk.
The secret may be that the parts are basted and powder coated almost immediately afterwards. He uses a hell of a compressor for blasting. It’s the type used to drive road drills so the parts are really clean.
By the way, this is “commercial” work – it cost over ?1000 to do the chassis and wheels. Perhaps that’s why he took care.
I will find out about the etch primer and chassis paint used.Time will tell if this is successful.
Colin
DavidLG455 December 2014 at 17:24 #51088That does seem quite expensive so would hope for a good job. By commercial was meaning the regular trade customers rather than us one off job car enthusiasts.
David
Colin M345 December 2014 at 19:14 #51089Hi David
Yes he worked hard on doing the chassis and it was the “right price” for a good job. I felt it was good value for money.
A professional restorer in the area also uses this guy.
Colin
Alec Rivers-Bowerman6 December 2014 at 08:30 #51091Hi Colin – looks great! Any chance you can get some thickness measurements off the springs? Mine are not original except for three of the four leaves with the eyes in the ends and I’m unable to find the correct thickness for the other leaves. I’m guessing 0.218″…
Alec
SRD10 December 2014 at 09:43 #51103Colin
At this rate you will be able to offer a road worthy car by the summer – impressive result, starting with a chassis found in a hedge!
Kind regards
Simon
Colin M347 January 2015 at 23:11 #51134Dear All,
You will be pleased to hear that my project has now found a new owner. The car will be finished with a 2-seater sports body on it and he gets two engines and two pre selector gearboxes.
This a great result, especially bearing in mind it had no engine and gearbox when I found it. Also, it is made up as a special out of a pile of rusty bits – albeit mainly from one car – so we have not broken up a perfectly good saloon to make a racer.
Good news all round I think.
Colin
TVJL9 July 2018 at 00:26 #52840Hi Colin,
I was wondering about the fate of this special. Have you any photographs to share, please?
Atb,
Tim
Colin M349 July 2018 at 11:37 #52841I sold it.
It now looks splendid with a 2-seater special body but I do not have any photos to share on this site.
-
|
You must be logged in to reply to this topic.