• bill
    10 September 2019 at 08:28 #53057

    I have been trying very hard to have a clear out ! All circa 1932 3 litre parts. I have a windscreen which came off my 3 litre originally. It may be an altered 2 litre one – I am not sure. I took it off my 3 litre to put on a fold flat screen. I have tried to post a photo here but cannot work out how to resize it for posting. Let me know if you are interested and I will send a photo by email. Price ?300-400 ? Is that reasonable ?
    Also have 4 engine mountings and various rectangular engine cover side plates. An original clutch and flywheel, a dynamo and the front engine casting (which has the magneto platform and water pump cross shaft etc). Also some camfollowers somewhere I think ! Member T16. I may have other smaller items if I can find them ! Send me an email or call for further information.
    Many thanks.

    10 September 2019 at 09:04 #53058

    Sorry ! For some reason my post above has appeared in the Rapier section not the 3 litre section. I don’t know how to transfer it so will post it again now in the correct section.
    Apologies !

    Richard Branch
    11 September 2019 at 16:43 #53060

    Hi Bill, I am not a 3 Litre aficionado so should I take it that this is non-folding screen?

    I own a 16/80 which has a screen the opens from the bottom and the idea of a fold down screen rather appeals to me but by the sound of it that’s exactly what you did to your 3 Litre too.

    Rgds Rich…

    11 September 2019 at 18:10 #53061

    Hi Rich
    Yes it is a screen which opens out forwards at the bottom. I replaced it in order to have a screen that folded down from the top so that I could have aero screens.

    Richard Branch
    14 February 2020 at 22:52 #53117

    Hi Bill, out of interest,because I want to do the same on my 16/80, what folding screen did you use? Was it from a 2 litre?

    16 February 2020 at 14:05 #53118

    Hi Rich
    The screen that I used was a Bentley screen where the aero screens doubled as wind deflectors when the screen is up. I got the bare side castings from James E.Pearce Bentley Specialists. They also supplied me with some of the brass rails etc and I made it all up so that it fitted the car. You need to be able to do silver soldering !

    Richard Branch
    16 February 2020 at 19:06 #53119

    Thanks Bill, food for thought.

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.


Request to join the Lagonda Forum

To avoid rogue requests we are currently manually approving all forum applications. Please fill out your details below and we will forward a link and password to complete your application.