• John Hugh
    29 March 2008 at 18:14 #47249

    Anyone know the sizes etc of the 2 screws that secure the cap on the inboard end of the steering column (i.e. the cap carrying the horn button)? Both are missing on my car and the insulating tape holding the cap in place is hardly concours…



    Brian Savill
    10 April 2008 at 20:24 #47259

    Hi John.
    You do not state what model. I do know that the later 2 Litre and 16/80 has 4 screws that secure the boss that the horn button fits in. They are 3/16 inch Whit. (24 TPI) 5/8 long C/SK screws.
    Hope this helps.
    Regards, Brian. (S28)

    John Hugh
    11 April 2008 at 10:47 #47260

    Thanks very much Brian. The car is a 1928 high chassis tourer. I’ll try the Whitworths asap.


    John Hugh
    15 May 2008 at 18:48 #47350

    Just to conclude this thread – in the early 2 litres (14/60 and HC tourer anyway), the 2 screws securing the cap are 5 BA (at least these worked for me, without obvious thread graunching..)


Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.


Request to join the Lagonda Forum

To avoid rogue requests we are currently manually approving all forum applications. Please fill out your details below and we will forward a link and password to complete your application.