• bill
    15 November 2011 at 19:02 #48555

    Does anyone have an old/scrap LG45 crankshaft that I could have or even borrow please ?
    I want to get my flywheel and clutch assembly balanced but the balancer needs a crankshaft to mount everything on. He says that the condition of the crankshaft is immaterial. He could of course make a mandrel but then things get expensive…!
    My own crankshaft is of course inside my engine so I cannot use that.
    Any suggestions or offers very gratefully received.
    Many thanks.
    Bill

    Alistair Crawford
    15 November 2011 at 22:42 #48556

    Bill
    I have one that may be suitable that you could borrow although as you know they are very heavy so depending on where you are the transporting of it would be costly. send me a PM with your address etc

    Colin M34
    16 November 2011 at 22:34 #48558

    Bill,

    The people I deal with can balance a Meadows flywheel without a crank. PM me and I will give you their details. They did my M45.

    Colin M34

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

0

Request to join the Lagonda Forum

To avoid rogue requests we are currently manually approving all forum applications. Please fill out your details below and we will forward a link and password to complete your application.