• Steve Darnell
    16 April 2018 at 16:30 #52735

    My 14/60 dynamo has a steel disc at the dynamo end of the drive shaft. The other end has a Flex Drive. The steel disc is broken, but the Club don’t list a replacement.

    I have the facilities to make a new one, but need advice as to the best metal/material to use.

    Unless someone has a spare……………

    Colin M34
    16 April 2018 at 20:07 #52736

    Hi Steve

    I have the same arrangement. I think a nice piece of spring steel would do the job. You will have to drill it fairly accurately and then bolt it up.

    Colin M34

    Steve Darnell
    19 April 2018 at 07:57 #52747

    Took the dynamo off altogether and….. When I’d had the cradle bolts replaced with larger ones, and the holed re-drilled & re-tapped, I’d failed to notice that the new bolt head were stopping the dynamo being a snug fit in the cradle. Half an hour with the mini-grinder, and now the shaft alignment is spot-on!! The joys of old motors….. :angel:

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

0

Request to join the Lagonda Forum

To avoid rogue requests we are currently manually approving all forum applications. Please fill out your details below and we will forward a link and password to complete your application.