Acquired recently

Spares Used Spares Acquired recently
Part no. Part description Price (Ex Vat)
1182 16/80 crankshaft (with certificate) £900
1183 16/80 Oil pump £250
1184 16/80 camshaft £25
1186 16/80 oil pipes £25
1187 16/80 LC water pump £150
1188 ENV prop shaft drive flange £25
2238 14/60 upper bell housing £60
2239 14/60 timing idler drive unit £20
2240 14/60 mounting feet £20
2244 2L crown wheel in sound condition & pinion with chipped tooth (suitable for gear cutters pattern use). £50
2246 3L Fully re-conditioned (as new) bronze bodied oil pump for 2L (This is the big bore version fitted to super charged cars). £600
2247 2L bronze bodied oil pumps, incl internals and suitable for reconditioning. £100
2249 2L Phosphor bronze inlet manifold casting for 2L engines (unmachined) £25
2250 2L super charger mounting casting, unused, fully machined £80
2251 2L Timing case stamped 2B 1019.  Cracked under magneto platform, but repairable £80
2252 2L Small timing cover .  Fits over fibre magneto drive gear and chain adjusters.  Good condition, P Cover £30
2253 2L Headlamp dipping lever (Barker type).  With mounting bracket and short rod & clevis.  Rusty but sound £60
2254 2L Front seats for a saloon.  Good for patterns and metal frames all in place, stuffing & drivers cushion £100
2258 2L Brake back plate for rear axle - pitted but useable  £80
2260 2L Rear brake shoes with NOS linings.  Need cleaning but may be useable as they are £10
2261 2L Alloy brake shoes in box marked 'front'. £10
2263 2L Set of oil pipes for cylinder head £15
2265 2L Running board brackets (original).  Good condition  but dirty £20
2266 2L Bronze inlet manifold spacer with nice take-off for Autovac pipe £20
2267 2L Bronze bodied 1 1/4" SU carburettor with choke.  Good condition £300
2269 2L Steering column support bracket (adjustable) with cast mounting brackets that bolts to bulkhead.  Good condition £90
2270 2L OH Conrod in good condition £10
2271 2L Saloon door lock mechanisms and door shuts  £50
2272 2L Saloon door handles £20
2274 2L Rocker cover, fair condition £30
2275 2L Fluid for Hobson telegauge £15
2276 2L Clock - appears to be high chassis instrument panel £20
2277 2L Inlet camshaft, cams in fair condition,  Needs cleaning up £80
2278 2L Spare wheel retaining spinner £10
2279 2L Early HC bonnet catch (Ripaults).  Dirty but in good condition £25
2286 2L Dynamo drive £50
2289 LG45 window winder £25
2290 propshaft cover £10
2361 2L clutch spider £25
2362 2L clutch pedal & arm £40
2365 2L over centre bonnet catch casting £20
2366 2L HC front valances (pair) £250
2367 2 HC rev counter drive cable £10
2368 2L rear bump stop holders (pair) £30
2369 2L LC brake pivot converted to rods (pair) £150
2371 2L HC water pump (complete) £230
2372 2L HC inlet manifold £50
2373 2L H/C exhaust manifold £200
2374 2L H/C exhaust manifold (broken) £0
2375 2L L/C water pump housing £150
2376 2L Oil pump  £150
2377 14/60 clutch pedal cross shaft £60
2378 2L water pump brass part £20
2379 2L oil pick up from sump £30
2380 2L drive spider £20
2381 2L rev counter drive gear, rear of cam £20
2382 2L Y piece for oil feed in timing cover £20
2383 2L side of block water elbow (pattern) £10
2384 2L HC water pump nut £5
2386 2L camshaft adjuster £5
2388 2L dipping mechanism £60
3121 3L Cam roller followers and pins (new). £13
3122 3L Cam follower pins, (used but sound). £7
3123 3L Stirrup housings, (sound). £20
3125 3L Steering ball pins at 1.00" Dia. NOS £10
3126 3L Steering ball pins at 1.156" Dia, for steering arms (1 5/32 for any link end). NOS £10
3127 3L Ball pin nut, incorporating grease nipple for centralised lubrication applications, or drilled ball pin. £10
3128 3L R/hand Track rod end assembly with ball pin and new seats etc. £40
3129 3L ENV axle back plate (original) with oil level plunger & spring and filler/vent plug. £100
3130 3L Flanged u/j with splined connection for prop shaft (as new) £100
3131 3L Crank nose nut (dyno-drive). £15
3132 3L Crank rear 1/2 plate seals 3/3.5L engines (really only one pair) £10
3133 3L Fan pulley. £20
3134 3L Filter towers, c/w cam lock cover - dipstick location assy. £50
3135 3L Front cam shaft bearing housing, excellent white metal and 2 off hardened thrust washers £30
3137 3L Original 1930 two piece hood rear window surrounds £60
3138 3L New chrome on brass petrol filler cap surround & lever for LG45/LG6 pattern assy + spare lever casting (unplated). £50
3139 3L Clutch stop operating lever (pinch-bolted to clutch shaft). £20
3140 3L Water pump gland nut. £8
3141 3L New fixed clutch operating pin + 8 off 'free' pins. £50
3142 3L cam follower stirrups (roller housing). £15
3143 3L 7/16 UNF head studs. £4
3144 3L Starter Shaft (Bendix) housing. £30
3145 3L Gear lever rod housing (Z gearbox). £10
3146 3L, 2L '1/2 housing' (clutch/flywheel). £60
3147 3L, 2L Cross casting for above (clutch shaft location). £55
3148 3L Rocker box trumpet. £20
3149 3L O/side front axle back plate (ZMB chassis). £100
3152 3L Vacuum chamber (oil). (Also for 2 Litre). £25
3153 3L Autokleen strainer complete, incl casing and ratchet operation. £30
3154 3L Timing case cross shaft bearing housing & bush. £25
3155 3L Bronze flanged copper crankcase breather pipe. £15
3156 3L Rear half of timing case (to block). £35
3157 3L Clutch operating shaft. £30
3158 3L Flywheel blanking 'top hats' inc 1 off newly made. £10
3159 3L crankshaft (Incl certificate for crack-free test). £900
3161 3L Rocker shaft assembly c/w 3 rocker pedestals spacer springs and rockers (4). (Half of an engine set). £100
3162 3L Bronze rocker pedestals (6) and 12 rockers + 4 short & 4 long spacer springs. £150
3163 3L Steering arms (ZM chassis). £50
3165 3L perrot shaft. £20
3172 3L Engine/gear box splined drive shafts in fairly good condition.  £10
3173 3L Spider coupling. £60
3177 3L, 4:1/1 ENV crown wheel and matching pinion assembly both in excellent condition. £400
3178 3L, 3.5L Pair of newly made GR18 iron, cast ex manifolds. Detail drawings of exact copy phosphor bronze clamp rings provided together with manifold M/C details. £500
3179 3L Starter assy housing castings, un-machined . £10
3182 3L, 3.5L rocker boxes both of shallow (72mm unit) & deep (75mm unit ) design £100
3183 3L original Lagonda side lights (pair) £100
3184 3L Original Lagonda radiator badge £30
3185 3L Push & turn bonnet catch £80
3189 3L Clutch outer friction plate £100
3190 3L Clutch inner frictionplate £30
3191 3L Oil pump sundries £40
3193 3L Crankshaft oil blanker £20
3194 3L camshaft, standard profile. £200
3195 3L halfshaft 28.5" £100
3196 3L ZM chassis stub axle £70
3197 3L Brake cross shaft c/w pedal (rusty) £125
3199 3L Autokleen body £15
3203 3L Oil pick up pipe £35
3204 3L battery cover clamp (pair) £25
3205 Sump guard 3L £10
3206 3L water pump housing £20
4365 Meadows block casting £500
4366 T8 gearbox housing £450
4367 LG45 headlamp bar and end castings £300
4370 'Clayton Dewandre' servo for M45 braking system.  Restored by specialist, plus associated shafts & levers for installation £350
4370 M45R rear axle case £1,500
4373 4.5L CWP 3.58:1 £350
4374 M45 pattern dashboard £50
4376 M45 Dynamo drive idler £200
4377 4.5L water pump drive idler £200
4378 4.5L clutch arm (painted black) £10
4379 V12/LG45 bonnet handle £30
4380 M45 Vernier coupling £20
4381 M45 boot handle £20
4382 M45 rocker box cover £250
4383 M45 radiator shutter thermostat, push & pull £10
4384 M45 wiper arms (pair) £10
4386 M45 Rapide brake shoes (4) £50
4387 M45R Andre Hartford 3 bolts shock absorber (6) £700
4388 Andre Hartford pressure pots & chassis bracket £200
4389 Andre Hartford hand wheels with steering column clamp bracket £150
4390 Andre Hartford hand wheels, no brackets (pair) £50
4391 LG45/M45 stub axle £100
4394 4.5L middle rocker assembly £150
4395 LG45 strong back diff spacer ring £150
4396 4.5L front timing cover £500
4397 4.5L rear brake rod £20
4399 4.5L incomplete crankshaft damper £50
4400 4.5L timing chain (pair) £10
4401 T8 reverse gear (pair) £30
4402 T8 1st/2nd gear £30
4403 LG45 brake springs (3) £25
4404 M45R brake springs (3) £25
4405 M45 carburettor chamber lid with float (pair) £10
4406 Luvax shock absorber link arm £45
4408 silent body brakcet £10
4409 LG6 block £500
4410 LG45 oil filter housing, no pressure release relief £100
V307 Pair of V12 bulkhead side castings £800
V308 Set of V12/LG6 radiator shutters £400
V315 Quarter light thumb knob £10
V316 LG6 clutch shaft £75

Use this menu

If you have any specific requests for new parts that the Club does not stock, please contact the Spares officer.